LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts >> WM 420519 Removing And Installing Rear Axle Housing (All Models) >> Subsequent Work

Subsequent Work

  1. Fit rear muffler → Installing Exhaust System .
  2. Fit wheels → Removing and installing wheel .
  3. To fill the level adjustment system, use the Porsche System Tester. To do this, select the Fill air suspension menu item in the Level adjustment system. Switch on level adjustment → WM 4000V0 Lifting the vehicle .
  4. Perform suspension alignment → 456005 INITIALISING AND CALIBRATING STEERING ANGLE SENSOR .
scientia non olet · About LEMON Manuals