LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> 40 - Front Wheel Suspension, Drive Shafts >> WM 407719 Removing And Installing Front Anti-Roll Bar (PDCC) (Except Cayenne Diesel) >> Subsequent Work

Subsequent Work

  1. Install engine guard → WM 108019 REMOVING AND INSTALLING ENGINE GUARD (UNDERBODY PANELLING) on DFI engines.
  2. Complete the following steps in sequence using the PIWIS System Tester by selecting PDCC >> System replacement >> Replace anti-roll bars <<: → WM 4303AW SAFETY REQUIREMENTS FOR PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
    1. 2.1. Set valve timing
    2. 2.2. Bleed the system → WM 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
    3. 2.3. Carry out a system test.