Tools And Materials: Tools

Tool overview for chassis sub-frame bearings assembly fixture T10301 

Fig 1: Overview Of Chassis Sub-Frame Bearings Tool

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. -A-  Hydraulic cylinder VAS 6178 (The hydraulic cylinder is used together with the foot pump VAS 6179 and the pressure gauge with connecting cable VAS 6179/1 -B-  .)
2. -1-  - Threaded rod (Inserted into the tubular piston cylinder -A-  .)
3. -2-  - Threaded nut (Screwed onto the threaded rod -1-  .)
4. -3-  - Pipe (For pressing out the chassis sub-frame bearings.)
5. -4-  - Ring (For pressing out the chassis sub-frame bearings.)
6. -5-  - Press-out plate (For pressing out the chassis sub-frame bearings.)
7. . -6-  - Pressure piece (For pressing in the chassis sub-frame bearings.)
8. -7-  - Press-in plate (For pressing in the chassis sub-frame bearings.)
9. -8-  - Ring (For pressing out the chassis sub-frame bearings.)
10. -9-  - Spacer sleeve (For pressing out the chassis sub-frame bearings together with pipe -3-  .)
11. -10-  - Pressure piece (For pressing in the chassis sub-frame bearings.)
12. -11-  - Spacer sleeve (For pressing in the chassis sub-frame bearings.)

Porsche supplement set T10301/20 

1. -2-  - Threaded nut (Screwed onto the threaded rod -1-  .)
2. -12-  - Press-out ring (For pressing out the chassis sub-frame bearings.)
3. -13-  - Pressure piece (For pressing in the chassis sub-frame bearings.)
4. -14-  - Bush (For pressing out the chassis sub-frame bearings.)

Fig 2: Identifying Porsche Supplement Set (T10301/20)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Counter support, 0 - 40 mm Nr.106 

Internal puller Nr.108 

Separating device, 12 - 115 mm ø Nr.111