Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear final drive | to rear axle housing | Initial tightening | 90 Nm (67 ft lbs.) | ||
| Rear final drive | to rear axle housing | Final tightening | 90° | ||
| Cardan shaft | to rear final drive | Initial tightening | 30 Nm (22 ft lbs.) | ||
| Cardan shaft | to rear final drive | Final tightening | 90° | ||
| Cardan shaft holder | to body | Tightening torque | 60 Nm (44 ft lbs.) | ||
| Cardan shaft holder | to centre bearing | Tightening torque | 20 Nm (15 ft lbs.) |