Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing

Fig 1: Overview From Outside (Body)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Clean welding and sealing areas.
   1. 1.1. Clean undersealing, adhesive residue and paint off the connecting flanges of the body in the marked areas using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
      Fig 2: Preparing Connection Areas On Body

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Coat spot-weld flange areas with zinc powder paint.
   1. 2.1. Coat all spot-weld flange areas with zinc powder paint.