Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| C-pillar, outer | Cut dimension, old part | 50 mm | |||
| C-pillar, inner | Cut dimension, old part | 75 mm | |||
| C-pillar, inner | Cut dimension, new part | 20 mm | |||
| C-pillar side section, outer | Cut dimension, new part | 240 mm | |||
| C-pillar, inner | Cut dimension, new and old part | 55 mm | |||
| C-pillar side section, outer | Cut dimension, new and old part | 30 mm | |||
| Seals | Application depth | 10 mm |