Fitting Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit seal on the C-pillar.
- 1.1. On the seal -1-
, apply Wurth Klebt und Dichtet body sealant -2-
in area -A-
. Maintain the application depth -V-
→ Application depth: 10 mm
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 1.2. Position seal -1-
on the C-pillar -arrow-
and press on evenly until the side clip connection engages.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install rear wheel housing. → Installing Rear Wheel Housing
- Install lower side member reinforcement. → Installing Lower Side Member Reinforcement
- Install outer side member. → Installing
- Install rear side section. → Installing Rear Side Panel