Gap Dimensions
Information
- The figures showing the gap dimensions can be found in the section entitled → Diagram of gap dimensions.
| Designation | Dimension | Note | ||
|---|---|---|---|---|
| Door to outer side section | -g- | 4 ±0.5 | mm | Door only raised (max. 1 mm) |
| Front door to rear door | -k- | 4.5 ±0.5 (3.7±0.5) | mm | Rear door only lowered (max. 1 mm) |
| Front door to front wing | -n- | 4.5 ±0.5 (3.7±0.5) | mm | Front door only recessed (max. 1 mm) |