Gap Dimensions Of Rear Lid Trim Panel

Fig 1: Identifying Gap Dimensions Of Rear Lid Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Rear Lid Trim Panel To Outer Side Section

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid trim panel to outer side section (B)		Gap dimension	4.5 mm	+/-1 mm

Fig 3: Identifying Gap Dimensions Of Rear Lid Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 4: Identifying Molding To Rear Window

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Molding to rear window (M)		Gap dimension	4.7 mm	+/-0.8 mm

Fig 5: Identifying Gap Dimensions Of Rear Lid Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 6: Identifying Molding To Cover

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Molding to rear lid trim panel (N)		Gap dimension	2 mm

Fig 7: Identifying Gap Dimensions Of Rear Lid Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 8: Identifying Trim Panel To Rear Lid

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Trim panel to lid (O)		Gap dimension	2 mm	+/-0.7 mm