Gap Dimensions Of Rear Apron

Fig 1: Identifying Gap Dimensions Of Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Rear Apron To Outer Side Section

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear apron to outer side section (K)	Gap is evident	Gap dimension	0.5 mm	+/-0.5 mm

Fig 3: Identifying Gap Dimensions Of Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 4: Identifying Rear Light To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear light to rear apron (L)		Gap dimension	3 mm	+/-1 mm

Fig 5: Identifying Gap Dimensions Of Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 6: Identifying Bottom Of Rear Lid To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Bottom of rear lid to rear apron (P)		Gap dimension	5.5 mm	+/-1 mm

Fig 7: Identifying Gap Dimensions Of Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 8: Identifying Rear Apron Cover To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Type	Basic value	Tolerance 1	Tolerance 2
Rear apron cover to rear apron (R)	Gap dimension	1.5 mm	+/-0.7 mm
Rear apron cover to rear apron (S)	Gap dimension	1.5 mm	+0.5 mm	-1 mm
Rear apron cover to rear apron (T)	Gap dimension	0.5 mm	+/-0.3 mm

Fig 9: Identifying Gap Dimensions Of Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 10: Identifying Side Of Rear Lid To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Side of rear lid to rear apron (U)		Gap dimension	4.5 mm	+/-0.5 mm