Gap Dimensions Of Front Wing

Fig 1: Identifying Gap Dimensions Of Front Wing

G09419945

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Front Door To Front Wing

G09419946

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front door to front wing (N)	Front door only lowered (max. 1 mm)	Gap dimension	4.5 mm	+0.7 mm	-0.5 mm

Fig 3: Identifying Gap Dimensions Of Front Wing

G09419947

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 4: Identifying Front Wing To A-Pillar

G09419948

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front wing to A-pillar (O)		Gap dimension	2 mm	-0.5 mm	+1 mm

Fig 5: Identifying Gap Dimensions Of Front Wing

G09419949

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 6: Identifying Wing To Front Lid

G09419950

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front wing to front lid (A)		Gap dimension	4 mm	+/-1 mm

Fig 7: Identifying Gap Dimensions Of Front Wing

G09419951

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 8: Identifying Front Apron To Wing

G09419952

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front apron to front wing (G)	Gap is evident	Gap dimension	0.5 mm	+/-0.5 mm

Fig 9: Identifying Gap Dimensions Of Front Wing

G09419953

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 10: Identifying Main Headlight To Front Lid

G09419954

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Main headlight to front lid (E)		Gap dimension	4 mm	+/-0.5 mm

Fig 11: Identifying Gap Dimensions Of Front Wing

G09419955

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 12: Identifying Main Headlight To Front Wing

G09419956

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Main headlight to front wing (F)		Gap dimension	3 mm	+/-0.5 mm
Main headlight to front wing (G)		Gap dimension	3 mm	-1 mm