Gap Dimensions Of Rear Door

Fig 1: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Gap Dimension From Front Door Molding To Rear Door Molding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front door molding to rear door molding (P)	Rear door only lowered	Gap dimension	0 mm	-1 mm

Fig 3: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 4: Identifying Gap Dimension From Rear Door Frame To B-Pillar Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Gap dimension from rear door frame to B-pillar trim panel (Q)		Gap dimension	0.8 mm	+/-0.5 mm

Fig 5: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 6: Identifying Door Window To Molding And Outer Side Section

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Door window to molding and outer side section (F)		Gap dimension	5 mm

Fig 7: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 8: Identifying Door To Outer Side Section

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Door to outer side section (G)	Door only raised (max. 1 mm)	Gap dimension	4 mm	+/-0.7 mm	-0.5 mm

Fig 9: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 10: Identifying Door Cover To Outer Door Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Door cover to outer door panel (H)		Gap dimension	4 mm

Fig 11: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 12: Identifying Door Cover To Outer Door Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Door cover to outer door panel (J)		Gap dimension	0.5 mm

Fig 13: Identifying Gap Dimensions Of Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 14: Identifying Front Door To Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Front door to rear door (K)	Rear door only lowered (max. 1 mm)	Gap dimension	4.5 mm	+/-0.7 mm	-0.5 mm