Adjusting Panel 2 Of Panorama Roof

Fig 1: Identifying Air Deflector And Panoramic Roof Panels

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1  - Panel 1

2  - Panel 2

3  - Panel 3

4  - Panel 4

5  - Air deflector

1. Adjust height -Y-  and gap -Z-  on panorama roof panel -2-  at the rear. → Adjustment value: 1 mm+/-0.5 mm → Adjustment value: approx. 7.1 mm 
   Fig 2: Identifying Height Y And Gap Z On Panorama Roof Panel 2 At Rear Adjustment Dimensions

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Tighten fastening screw -6C  - to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) 
3. Tighten fastening screw -6B  - to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) 
4. Adjust height -X-  and gap -Z-  on panorama roof panel -2-  at the front. → Adjustment value: 1 mm+/-0.5 mm → Adjustment value: approx. 7.1 mm 
   Fig 3: Identifying Height X And Gap Z On Panorama Roof Panel 2 At Front Adjustment Dimensions

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Tighten fastening screw -6A-  to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)