Adjusting Panel 1 Of Panorama Roof

Fig 1: Identifying Air Deflector And Panorama Roof Panels

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1  - Panel 1

2  - Panel 2

3  - Panel 3

4  - Panel 4

5  - Air deflector

1. Adjust height -X-  on panorama roof panel -1-  at the front. → Adjustment value: 0.5 mm+/-0.5 mm 
   Fig 2: Identifying Height X On Panorama Roof Panel 1 At Front Adjustment Dimensions

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Tighten fastening screws -10-  to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) 
3. Adjust height -Y-  and gap -Z-  on panorama roof panel -1-  at the rear. → Adjustment value: 1 mm+/-0.5 mm → Adjustment value: approx. 7.1 mm 
   Fig 3: Identifying Height Y And Gap Z On Panorama Roof Panel 1 At Rear Adjustment Dimensions

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Tighten fastening screw -8A-  to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) 
5. If necessary, loosen fastening screw -8B  - as well, adjust height -Y-  and tighten fastening screw -8B  - to the specified tightening torque. → Tightening torque: 4 Nm (3 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)