Removing And Installing Foam Part In Vehicle With Externally Fitted Spare Wheel

Fig 1: Identifying Trailer Hitch

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Pull connector off lock for spare wheel mount.
   1. 1.1. Release connector -1, 2-  (-Arrows A-  ) and pull off (-Arrows B-  ).
      Fig 2: Pulling Out Connector Off Lock

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Replace foam part.
   1. 2.1. If the foam part -3-  was damaged during removal, the new part must be shortened at the cutting line -X-  .
      Fig 3: Identifying Foam Part

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      Fig 4: Identifying Cutting Line

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation is performed in reverse order.