Removing (Stainless Steel) Rear Trim

Fig 1: Identifying Installation Position Of Rear Trim (Stainless Steel)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Use new clamping washers during installation.

1. Press clamping washers -1-  out of the retaining pivots using a screwdriver -arrow-  .
   Fig 2: Loosening Rear Trim

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Carefully remove the rear trim -1-  from the rear apron -2-  with the help of another person -arrows-  .
   Fig 3: Removing Rear Trim

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.