| Fastening screw securing rail to side panel |
|
Tightening torque |
1.5 Nm (1.0 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| Fastening screw securing rear apron to rail |
|
Tightening torque |
1.5 Nm (1.0 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| Fastening screw securing rear apron to closing panel support |
|
Tightening torque |
4.5 Nm (3.5 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| Fastening screw securing cover to rear apron |
|
Tightening torque |
4.5 Nm (3.5 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| Fastening screw securing rear apron to side panel |
|
Tightening torque |
1.5 Nm (1.0 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| Fastening screw securing wheel housing liner to rear apron |
|
Tightening torque |
2.5 Nm (2.0 ftlb.) |
+/-0.5 Nm (+/-0.5 ftlb.) |
|
| X = distance from upper part of rear apron |
|
Gap dimension X |
18 mm |
|
|
| Y = work out distance at sides to the left and right uniformly |
|
Gap dimension Y |
20 mm |
|
|
| X = distance from upper part of rear apron |
|
Gap dimension X |
18 mm |
|
|
| Y = work out distance at sides to the left and right uniformly |
|
Gap dimension Y |
20 mm |
|
|
| X = distance from upper part of rear apron |
|
Gap dimension X |
7 mm |
|
|
| Y = work out distance at sides to the left and right uniformly |
|
Gap dimension Y |
7 mm |
|
|
| Fastening screw nut securing centre retaining strip to end plate |
|
Tightening torque |
8 Nm (6 ftlb.) |
+/-1 Nm (+/-0.5 ftlb.) |
|