WM 5000IN Seam Seals (All Models): Accessories: Notes

Information 

• In the case of repair work, accessories must be sealed before assembly (painting) according to the following illustrations. 
• The sealing material, Wurth's "Klebt und Dichtet" body sealant can be applied directly to the components that are coated with KTL paint. 
• The seam seal can be painted over when it has reached approx. 70 % hardness (approx. 4 - 5 h at 20 °C, 50 % relative air humidity. Higher air humidity or dampening with water accelerates the hardening process). 
• The hardening can be checked with a nail test. Press a finger nail gently into the hardened sealing mass; if this causes no damage to the sealing mass surface, the seam seal can be painted.