LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 - Cables >> WM 970955 Sub-Part - Replacing Front Right Wiring Harness (All Models) >> Sub-Part - Removing Front Right Wiring Harness >> Removing Intake Pipe On The Heating/Fresh Air Unit

Removing Intake Pipe On The Heating/Fresh Air Unit

  1. Pull out wire harness retaining clips on the intake manifold -arrow A-  and unclip the wire harness on the intake manifold -arrow B-  .
    Fig 1: Removing Intake Pipe On Heating/Fresh Air Unit
    G09415998Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull out air inlet grille -arrow C-  .
  3. Open both retaining clips in the intake manifold -arrow D-  .
  4. Unscrew the two fastening nuts -1-  and remove the intake manifold.
scientia non olet · About LEMON Manuals