Removing Main Wiring Harness - Dashboard Area

1. Compress right rubber sleeve -Arrows A-  and remove it -Arrow B-  .
   Fig 1: Removing Right Rubber Sleeve

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Cut tie-wrap -C-  .
3. Remove wiring duct together with wire harness from pedal block -arrow-  .
   Fig 2: Removing Wiring Duct With Wire Harness From Pedal Block

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Press centre rubber sleeve together -Arrows A-  and remove it -Arrow B-  .
   Fig 3: Removing Centre Rubber Sleeve

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Compress left rubber sleeve -Arrows C-  and remove it -Arrow D-  .

Remove main wiring harness - roof area. Remove fuse element for auxiliary battery → Removing Fuse Element For Auxiliary Battery 

Remove main wire harness - floor area and left-hand side → Removing Main Wiring Harness - Floor Area And Left-Hand Side  .

Remove main wire harness - floor area and right-hand side → Removing Main Wiring Harness - Floor Area And Right-Hand Side  .

Remove main wire harness - engine compartment → Removing Main Wiring Harness - Engine Compartment  .