Installing Armrest With Cover (Rear)

Fig 1: Identifying Armrest Cover (Rear)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Install armrest with cover (rear): Insert armrest with cover -1-  with the pin -9-  in the guide -10- -Arrow A-  .
   Fig 2: Installing Armrest With Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Position armrest with cover -1-  with the pin -7-  on the guide -8-  and insert -Arrow B-  .
   Fig 3: Positioning Armrest With Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Push retaining clip -6-  over the pin -7-  until it engages fully -Arrow C-  .
   Fig 4: Pushing Retaining Clip - 6 Over Pin - 7

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Engage restraining strap of cover -5- -Arrow D-  .
   Fig 5: Engaging Restraining Strap Of Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Install armrest cover: Insert armrest cover -2-  from below -Arrow E-  and clip onto the backrest frame using the locking tabs -3- -Arrow F-  .
   Fig 6: Installing Armrest Cover Clip On Backrest Frame

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   Fig 7: Installing Armrest Cover Using Tool

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Swivel the armrest cover -2-  in over the backrest frame -Arrow G-  .
   Fig 8: Rotating Armrest Cover - 2 Over Backrest Frame

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
7. Close arm rest with cover -1- -Arrow H-  .
   Fig 9: Closing Arm Rest With Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
8. Install backrest. → Installing rear backrest