LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> 72 - Seat Frames >> WM 724719 Removing And Installing Rear Backrest (All Models) >> Removing Rear Backrest >> Removing Bushing For Centre Bearing

Removing Bushing For Centre Bearing

Fig 1: Identifying Centre Bearing Bushing
G09413728Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. At the joint of bearing shells -14-  , insert a screwdriver between shell and shaft bolt -13-  .
    Fig 2: Inserting Screwdriver Between Shell And Shaft Bolt
    G09413729Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Gently push the bearing shell -14-  sideways.
    Fig 3: Pushing Bearing Shell
    G09413730Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Pull bearing shells -14-  apart and remove.
    Fig 4: Removing Bearing Shells
    G09413731Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals