LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> 66 - Exterior Equipment >> WM 663419 Removing And Installing Side-Section Trim (All Models) >> Installing Side-Section Trim

Installing Side-Section Trim

Fig 1: Identifying Installation Position Of Side-Section Trim
G09412114Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position Side-Section Trim -2-  On The Side Member -Arrow-  And Secure With The Fastening Screws -1-  .
    Fig 2: Installing Side-Section Trim
    G09412115Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lift Off Rear Wheel Housing Liner -1-  In The Lower Area -Arrow A-  And Tighten The Fastening Screws -2-  (-Arrow B-  ). → Tightening Torque: 2.5 Nm (2.0 Ftlb.)+/-0.5 Nm (+/-0.5 Ftlb.) 
    Fig 3: Tightening Fastening Screws
    G09412116Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Screw In Fastening Screws -1-  On Rear Wheel Housing Liner -2-  In The Lower Area -Arrow-  . → Tightening Torque: 2.5 Nm (2.0 Ftlb.)+/-0.5 Nm (+/-0.5 Ftlb.) 
    Fig 4: Fastening Rear Wheel Housing Liner
    G09412117Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Position Cover -1-  On The Side-Section Trim -2-  And Press It In -Arrow-  .
    Fig 5: Positioning Cover
    G09412118Courtesy of PORSCHE CARS NORTH AMERICA, INC.