Installing Instrument Cluster

1. Position instrument cluster, then push on connector -A-  and lock it -B-  until it engages securely.
   Fig 1: Positioning Instrument Cluster

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Fold back instrument cluster and position it in instrument panel.
3. Place dashboard insert (cover for instrument cluster) -b-  in the installation position -arrow-  .
   Fig 2: Placing Dashboard Insert

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Lift dashboard insert (cover for instrument cluster) slightly at the front -arrow A-  and insert the fastening screw -3-  but do not tighten it.
   Fig 3: Installing Dashboard Insert Fastening Screw

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Push dashboard insert (cover for instrument cluster) completely to the front -arrows B-  and tighten the fastening screw -3-  .
6. Press dashboard insert (cover for instrument cluster) downwards and secure it with the fastening screws -1 and 2-  . → Tightening torque: 1.4 Nm (1.0 ftlb.) → Tightening torque: 1.4 Nm (1.0 ftlb.). 
7. Insert trim panel and press it against the dashboard insert (cover for instrument cluster) at the top until the clips engage securely.
   Fig 4: Inserting Trim Panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install left dashboard cover. → Installing dashboard cover on the driver's side