Bose Woofer

Information 

• Always use the screws and seals included in the scope of delivery. 

1. Seal new loudspeaker. → Sealing Bose Woofer 
2. Position the loudspeaker and secure with the four fastening screws -1-  . → Tightening torque: 3 ftlb. 
   Fig 1: Screwing Down Loudspeaker

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Slide the plug mount in latch on the support until the support is felt to engage.
4. Insert the connector until it is felt to engage.
5. Position the cover and screw down with the three new fastening screws -1-  . → Tightening torque: 3 ftlb. 
   Fig 2: Screwing Down Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.