| Front door trim strip to rear door trim strip (P) |
Rear door only lowered |
Gap dimension |
0 mm |
-1 mm |
|
| Gap dimension from rear door frame to B-pillar trim panel (Q) |
|
Gap dimension |
0.8 mm |
+/-0.5 mm |
|
| Door window to trim strip and outer side section (F) |
|
Gap dimension |
5 mm |
|
|
| Door to outer side section (G) |
Door only raised (max. 1 mm) |
Gap dimension |
4 mm |
+/-0.5 mm |
|
| Door cover to top of outer door panel (H) |
|
Gap dimension |
1 mm |
|
|
| Door cover to bottom of outer door panel (J) |
|
Gap dimension |
5 mm |
|
|
| Front door to rear door (K) |
Rear door only lowered (max. 1 mm) |
Gap dimension |
4.5 mm |
+/-0.5 mm |
|
| Fastening screws securing upper and lower door hinge to door |
Items -1, 2, 3- (M8 thread) |
Initial tightening |
20 Nm (15 ftlb.) |
+/-3 Nm (+/- 2 ftlb.) |
|
| Fastening screws securing upper and lower door hinge to door |
Items -1, 2, 3- (M8 thread) |
Final tightening |
90° |
|
|
| Fastening screws securing door lock striker to C-pillar |
Item -6- (M8 thread) |
Tightening torque |
20 Nm (15 ftlb.) |
+/-2 Nm (+/- 1.5 ftlb.) |
|
| Rear door to rear side section |
Installation dimension with pre-tension |
Test and adjustment value |
2 mm |
|
|