Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Porsche Doppelkupplung | Total filling capacity | 5.2 litres | |||
| Porsche Doppelkupplung | Fill according to oil filling specifications! | Change quantity | 0 litres | ||
| ATF oil drain plug | Tightening torque | 15 Nm (11 ftlb.) | +3 Nm (+2 ftlb.) | ||
| Support plate to cross member | M10 x 1.5 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Support plate to cross member (V-strut) | M10 x 1.5 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace with support plate to carrier side section | M10 x 25 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace to body | M12 - do not grease. | Tightening torque | 110 Nm (81.5 ftlb.) |