LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Boxster S, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 6X - Body-Equipment Outside - General -- 987-BOXSTER-CAYMAN >> WM 6X00IN Disposal Of Airbag And Seat-Belt PRETENSIONER Units (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, CAYMAN R) >> Connecting Ignition Tool >> Belt Tensioner

Belt Tensioner

Remove the side panel lining at rear. → REMOVING SIDE TRIM PANEL

  1. Connect plug of adapter cable 9257/3  to the belt tensioner.
    Fig 1: Connecting Plug Of Adapter Cable To Belt Tensioner
    G09590093Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Connect ignition device No. 9257 to the 2-pin plug of adapter cable No. 9257/3.
  3. Place the ignition device in front of the vehicle through the door gap and trigger it.
scientia non olet · About LEMON Manuals