LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Boxster S, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- 987-BOXSTER-CAYMAN >> WM 137519 Removing And Installing Vibration Damper (All Models) >> Subsequent Work

Subsequent Work

WARNING: Vehicle can fall down
  • Risk of squashing or crushing
  • Risk of damage to the vehicle

→ Do not place any solid objects under the raised vehicle.

→ Ensure that the lifting platform is prevented from lowering.

→ Remove solid objects before lowering the vehicle.

→ Raise the vehicle only at the jacking points provided.

→ The outer jacking points should be used primarily.

WARNING: Risk of engine falling down.
  • Danger of fatal injury, material damage.

→ Support the engine with the prescribed tool.

  1. Install lower part of engine carrier. → Installing engine carrier .
  2. Transmission jack V.A.G 1383 A WE 1082  can now be removed from the work area.
  3. Install underbody panels at the rear and center.

    519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY .

    519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .

  4. Fit the drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT .
  5. Install rear wall cover. → 555919 REMOVING AND INSTALLING REAR WALL COVER .