| Thrust-bearing screw |
M9 x 127 |
Initial tightening |
15 Nm (11 ftlb.) |
|
|
| Thrust-bearing screw |
M9 x 127 |
Torque angle |
120° |
|
|
| New connecting rod bolt |
M9 x 1.25 |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| New connecting rod bolt |
M9 x 1.25 |
Torque angle |
110° |
|
|
| Oil guide to gear carrier |
M6 x 16 (Torx, micro-encapsulated) |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Guide rail to gear carrier |
M6 x 40 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Additional screws for gear carrier 1-3 |
M9 x 94 and M9 x 84, internal Torx (one with O-ring) |
Tightening torque |
22 Nm (16 ftlb.) |
|
|
| Auxiliary screw for gear carrier |
Cylinder-head screw with spacer sleeve 9613 |
Tightening torque |
20 Nm (15 ftlb.) |
|
|