LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Boxster S, Automatic >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 987-BOXSTER >> WM 613055 Replacing Hood Frame (BOXSTER, BOXSTER S, BOXSTER S, BOXSTER S LIM. Ed. "Orange", BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Assembling Hood Frame >> Installing Tension Bow

Installing Tension Bow

  1. Press Teflon sleeves -1-  at both sides into the bore on the inside of the tension bow -2-  .
  2. Press Teflon sleeve -3-  into the bore on the outside of the tension bow -4-  from inside.
    3. Fig 1: Identifying Teflon Sleeves And Tension Bow
    G09590415Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Position tension bow -1-  on convertible top support -2-  and join with the pin -3-  (8 x 75 mm) -arrow-  .
  4. Press retaining clip -4-  into the pin.
    5. Fig 2: Pressing Teflon Sleeve
    G09590416Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals