Fastening Tension Rope Of Hood Covering
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Place tension rope -2-
into the guide level of the clamping rail -3-
and tighten the middle fastening screw -1-
on the main folding top bow. Tightening torque → Tightening torque: 5 Nm (3.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit fastening screw -1-
into the tension rope eyelet and hood covering and tighten it. Tightening torque → Tightening torque: 5 Nm (3.5 ftlb.)
- Carefully tilt the hood forward with your hand.
- Secure the clamping rail -2-
at the rear using the fastening screw -1-
. Tightening torque → Tightening torque: 5 Nm (3.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.