LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Boxster S, Automatic >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 987-BOXSTER >> WM 610519 Removing And Installing Latch At Front (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Installing Latch At Front >> Installing Front Lock

Installing Front Lock

  1. Push on connector -1-  for roof microswitch -2- -arrow-  .
    Fig 1: Pushing Roof Microswitch Connector
    G09590226Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Push the electric connecting lines for the interior light and the garage door opener control unit from above through the assembly openings on the front lock.

    Information 

    When fitting the front lock make sure the electric connecting lines are laid so that they are not trapped.

  3. Mount front lock -1-  from below -arrow-  on windscreen frame.
  4. Tighten front lock with the two fastening screws -2-  . → Tightening torque: 7.5 ftlb. 
    5. Fig 2: Locating Front Lock And Mounting Screw
    G09590227Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals