| Anti-roll bar to cross member/side member, M10 x 60 |
Please note: Do not grease threaded connection in Dacromet finish - aluminum color. |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Suspension/stabilizer to anti-roll bar, M10 |
Please note: Observe 3- stage tightening procedure! Do not grease threaded connection in Dacromet finish - aluminum color. |
3-stage tightening procedure (Stage 1: tighten to 50 Nm (37 ftlb.). Stage 2: loosen by 90 degree angle. Stage 3: tighten to 65 Nm (48 ftlb.)). |
65 Nm (48 ftlb.) |
|
|
| Suspension/stabilizer to shock-absorber pipe/wheel carrier, M12 x 1.5 |
Please note: Do not grease threaded connection in Dacromet finish - aluminum color. |
Tightening torque |
85 Nm (63 ftlb.) |
|
|