Installing Underbody Cover

Fig 1: Identifying Installation Position Of Cover For Rear Underbody

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

When pushing in the underbody cover, make sure the overlap is correct.

1. Insert cover for rear underbody -3-  .
2. Fig 2: Identifying Rear Underbody Cover And Fastening Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tighten fastening screws -1-  . Tightening torque → Final tightening: 1.5 ftlb.+/-0.5 ftlb. 

3. Tighten fastening nuts -2-  . Tightening torque → Final tightening: 1 ftlb.+/-0.5 ftlb. 
4. Tighten fastening nuts -4-  . Tightening torque → Final tightening: 3.5 ftlb.+/-0.5 ftlb.