LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Cayman Base, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN >> 53 16 55 Replacing Closing Cross Member - As Of My 2005 (All Models) >> Preparing Connection Areas Of The Body For Installing The Closing Cross Member >> Preparing connection areas of body for installing the closing cross member

Preparing connection areas of body for installing the closing cross member

Fig 1: Preparing connection areas of body for installing the closing cross member
GP00011643Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare. See Fig 1.

2. Coating spot-weld flange areas with zinc powder paint

2.1. Coat spot-weld flange areas with zinc powder paint.

scientia non olet · About LEMON Manuals