LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (35 - Mechanical Gear-Shift System - Gears & Shafts -- 987-BOXSTER-CAYMAN) >> WM 355019 Removing And Installing Sealing Ring For Input Shaft (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Installing Sealing Ring For Input Shaft >> Installing Sealing Ring For Drive Shaft - 5-Speed Transmission

Installing Sealing Ring For Drive Shaft - 5-Speed Transmission

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place new sealing ring on side of pressure piece 9743  with no cut-out.
    Fig 1: Identifying Sealing Ring
    G09586782Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Tap sealing ring into the guide sleeve using a rubber hammer.
    Fig 2: Tapping Sealing Ring Into Guide Sleeve Using Rubber Hammer
    G09586783Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals