Installing Brake Pedal

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

1 - Brake light switch
2 - Pedal axle
4 - Threaded bushing
5 - Bolt (replace after loosening)
6 - Brake pushrod
7 - Brake pedal
8 - Bearing sleeves

Fig 1: Exploded View Of Brake Pedal Assembly

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Grease bracket for brake pedal.
Grease bracket close to the pedal bearing axle -Arrows- with Renocal (Glissando VW 745). Part No. 000.043.206.21 (10g tube).
Insert brake pedal.
Turn the brake pedal -7- and brake pushrod -6- as required.
Fit brake pushrod on brake pedal. Use a new bolt, see -Inset- (replace bolt after loosening).
Tighten new bolt, see -Inset- .

→ Tightening torque: +10 Nm (+7.5 ftlb.)
Install pedal axle.
Tighten pedal axle -2- .

→ Tightening torque: +10 Nm (+7.5 ftlb.) - 2 Nm (- 1.5 ftlb.)

Fig 2: Identifying Pedal Axle
Courtesy of PORSCHE CARS NORTH AMERICA, INC.