LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (All Models) >> Removing Front Connecting Link (Suspension/Stabilizer)

Removing Front Connecting Link (Suspension/Stabilizer)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel. → REMOVING WHEEL Then loosen the lock nuts -arrows-  on the suspension/stabiliser. When loosening, counter with Torx T30 or open-ended wrench.
    Fig 1: Locating Connecting Link Nuts (Suspension/Stabilizer)
    G09587516Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Support wheel suspension on wheel carrier with suitable jack, and remove suspension/stabilizer.
scientia non olet · About LEMON Manuals