LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 405719 Removing And Installing Front Wheel Bearing (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install wheel bearing housing.
    1. 1.1. Tighten tension bolt on the wheel hub (wheel hub/wheel bearing threaded joint). Use a new lock nut (M22 x 1.5). Tightening torque: 460 Nm (340 ftlb.).
scientia non olet · About LEMON Manuals