LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN >> 53 69 19 Removing And Installing Rear Wheel Housing Liner - As Of My 2005 (All Models) >> Installing Rear Wheel Housing Liner >> Installing rear wheel housing liner

Installing rear wheel housing liner

Installation Location: 

Fig 1: Installation position of rear wheel housing liner
G00462210Courtesy of PORSCHE OF NORTH AMERICA, INC.
Fig 2: Installing rear wheel housing liner
GP00012035Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Insert wheel housing liner -3-  . See Fig 2.

2. Screw in fastening screws -1-  and tighten to the specified tightening torque→ Final tightening: 1.5 ftlb.  . See Fig 2.

3. Screw on fastening nuts -2-  and tighten to the specified tightening torque→ Final tightening: 1 ftlb.  . See Fig 2.

scientia non olet · About LEMON Manuals