LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN >> 53 48 55 Replacing Rear Side Member - As Of My 2005 (All Models) >> Preparing Connection Areas Of The Body For Installing The Rear Side Member >> Preparing connection areas of the body for installing the rear side member

Preparing connection areas of the body for installing the rear side member

Fig 1: Cleaning the welding areas
GP00011716Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare. See Fig 1.

Fig 2: Cleaning the welding areas
GP00011717Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D, E-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare. See Fig 2.

3. Coating spot-weld flange areas with zinc powder paint

3.1. Coat all spot-weld flange areas with zinc powder paint.

scientia non olet · About LEMON Manuals