LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster S, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN >> 53 48 55 Replacing Rear Side Member (Section) - As Of My 2005 (All Models) >> Installing Rear Side Member (Section) >> Subsequent work for body repairs

Subsequent work for body repairs

1. Removing vehicle from alignment bench

2. Cleaning spot-welded joints and sheetmetal flanges with a wire brush

3. Priming flange areas with 2K primer

4. Restore standard sealing with body sealant Refer to 50 IN Processing structural body adhesive - as of MY 2005 (All Models) .

5. Restore standard undersealing with underbody sealant Refer to 50 IN Processing structural body adhesive - as of MY 2005 (All Models) .

6. Painting repair area and adjacent surfaces, if necessary

7. Install removed accessories in the repair area

8. Applying cavity preservation

scientia non olet · About LEMON Manuals