LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit rear wheel → INSTALLING WHEEL
  2. Tighten axle nut on drive shaft (if it was removed).

    Tighten axle nut securing drive shaft to wheel hub: → Tightening torque: 460 Nm (340 ftlb.) 

scientia non olet · About LEMON Manuals