LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (94 - Lights, Lamps, Switches, Exterior -- 987-BOXSTER-CAYMAN) >> WM 944719 Removing And Installing Hazard Warning-Light Switch (All Models) >> Removing Hazard Warning-Light Switch

Removing Hazard Warning-Light Switch

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Hazard Warning-Light Switch
G09593469Courtesy of PORSCHE CARS NORTH AMERICA, INC.

On vehicles without a stopwatch: 

  1. 1. Reach through the openings of the removed center air vents and release the hazard warning-light switch at the left and right.
    Fig 2: Releasing Hazard Warning-Light Switch At Left And Right
    G09593470Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    On vehicles with a stopwatch: 

  2. 1. Reach through the openings of the removed stopwatch and release the hazard warning-light switch at the left and right.

    On vehicles without a stopwatch: 

  3. 2. Take the hazard warning-light switch out sideways through the dashboard, release the electric connector and pull it off.
    Fig 3: Unlocking Electric Connector
    G09593471Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    On vehicles with a stopwatch: 

  4. 2. Take the hazard warning-light switch out in an upward direction through the dashboard, release the electric connector and pull it off.