WM 481019 Removing And Installing Steering Wheel (All Models): Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The steering wheel is made of magnesium alloy. The tightening torques must be strictly observed .
- Wheels straight ahead and observe the previously-applied markings .
- Always replace multiple-tooth screw following removal (micro-encapsulated thread) .
- Observe specified tightening torque. → Tightening torque + torque angle: 30 Nm (22 ftlb.)+90°
- Airbag unit must lock with an audible click! Check by pulling on the airbag unit .
The steering wheel is installed in reverse order.