LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 421419 Removing And Installing Support Plate (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Removing And Installing Support Plate >> Removing Support Plate

Removing Support Plate

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle at the prescribed jacking points → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS) .
  2. Remove rear underbody panel.
  3. Remove right and left diagonal braces -B-  and the support plate -A-  (→ Removing Support Plate  . Pull out the support plate -A-  without undue force.
    Fig 1: Identifying Support Plates
    G09587558Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals