Installing carbon canister - USA Version

Fig 1: View of plug-in couplings

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Plug-in couplings in the vehicle

1. Insert canister and connect the plug-in couplings which must engage audibly.

Fig 2: Carbon canister for USA

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Slide plastic holder for the canister -3-  into the guide and fix to the plenum panel. Screw in two Torx screws M6 -2-  and tighten. → Tightening torque: 7.5 ftlb.  See Fig 2.

3. Connect cable plug and clip into the cable guide on the canister -1-  . See Fig 2.