Installing carbon canister - RoW Version

Fig 1: Body mounting point for RoW canister

Courtesy of PORSCHE OF NORTH AMERICA, INC.

1. Wet rubber sleeves with water. Press canister into the body bores -1-  . See Fig 1.

Fig 2: Carbon canister for RoW

Courtesy of PORSCHE OF NORTH AMERICA, INC.

2. Connect plug-in couplings to the underside of the canister and clip in the lines. Screw in collar nut M6 on the holder and tighten. → Tightening torque: 7.5 ftlb.