LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayman Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front- BOXSTER & CAYMAN >> 50 In Vehicle Identification Number - As Of My 2005 (All Models) >> Re-Imprinting New Vehicle Identification Number >> Re-imprinting new vehicle identification number

Re-imprinting new vehicle identification number

NOTE:
  • Only imprint vehicle identification number in a cathodic-dip coated sheetmetal part. 
  • The area should be countered when imprinting the vehicle identification number. 

1. Stamp the vehicle identificaiton number to be replaced with 8 mm letter/digit embossing tool with DIN 1451 closely spaced lettering, letter set NR.128-1  and the Porsche star Handschlagstempel 96930  in den Platzhalter einschlagen.

2. Mask imprinted vehicle identification number.

3. Apply exterior paintwork.

4. Remove the vehicle identification number mark.

5. Paint repair area with clear lacquer.

Cathodic-dip coating is the primer applied to the sheetmetal parts at the factory

scientia non olet · About LEMON Manuals